How to get a FISH board

FISH

Scissors board - the surface of the disc and the ring are crossed like in scissors

1. Put the disc on the ring as shown above (How to disassembly the ring click below)

2. Raise part of the ring

3. Place the disc on the two side pins

4. Insert a disc so deep that the face of the disc is under the pin like shown on the picture

5. By holding the board press the disc with your thumbs to the ring

6. Turn the ring to the left

7. until you obtain the Mark shown on the picture

8. Turn the ring clockwise until it stops

9. We can put the board on the countertop and raise the ring as shown on the picture